Frequently Asked Questions Answered Here
technical information tab

How long must I wait for the PP1 to stabilize after initial setup?


 

The Peak Performer requires 4-6 hours to stabilize the units heated zones after setup. However, RCP detectors require 12 hours in order to allow the HgO bed to fully equilibrate. Failure to allow the GC to fully stabilize could cause damage to the internal electronics. Also, please note that times will vary depending on how long your GC has been offline.

NOTE** For a more detailed step by step startup description please view section 3.1 in your user manual.

 

 

Please contact Peak Laboratories here or contact a local sales representative for custom applications and further information on our standard applications.

 


                               Contact Us Online





 
CLOSE WINDOW